APRIL | | |
Fiber glass mat uniformity (visual defects)
| |
T 1015 sp 15 |
Moisture content of fiber glass mats
| |
T 1012 om-15
|
Sample location for fiber glass mat sheets
| |
T 1007 sp-15
|
Solids content of black liquor
| |
T 650 om-15
|
Equivalent black area (EBA) and count of visible dirt in pulp,
paper and paperboard by image analysis
| |
T 563 om-15
|
Fiber analysis of paper and paperboard
| |
T 401 om-15
|
Accelerated temperature aging of printing and writing paper by
dry oven exposure apparatus
| |
T 573 sp-15
|
Machine direction of paper and paperboard
| |
T 409 sp-15
|
Turpentine test for voids in glassine and greaseproof papers
| |
T 454 om-15
|
Surface wettability and absorbency of sheeted materials using an
automated contact angle tester
| |
T 558 om-15
|
Roughness of paper and paperboard (print-surf method)
| |
T 555 om-15
|
Species identification of nonwood plant fibers
| |
T 259 om-15
|
Laboratory beating of pulp (PFI mill method)
| |
T 248 sp-15
|
Dirt in pulp - chart method
| |
T 213 om-15
|
Laboratory beating of pulp (Valley beater method)
| |
T 200 sp-15
|
Machine-direction grammage variation measurement (gravimetric
method)
| |
T 546 om-15
|
MAY | | |
Analysis of lime
| |
T 617 cm-10
|
Analysis of salt cake
| |
T 619 cm-10
|
Cupriethylenediamine disperse viscosity of pulp (falling ball
method)
| |
T 254 cm-10
|
Ink absorbency of blotting paper
| |
T 431 cm-10
|
Test conditions for fiberglass mat test methods
| |
T 1008 sp-15
|
OCTOBER | | |
Analysis of caustic soda
| |
T 613 cm-10
|
Analysis of rosin
| |
T 621 cm-10
|
Analysis of limestone
| |
T 618 cm-10
|
Analysis of rosin size
| |
T 628 cm-10
|
Pentosans in wood and pulp
| |
T 223 cm-10
|
Alpha-cellulose in paper
| |
T 429 cm-10
|
Acid-soluble iron in paper
| |
T 434 cm-10
|
Identification and determination of melamine resin in paper
| |
T 493 cm-10
|
Analysis of sodium hydrosulfite
| |
T 622 cm-10
|
Puncture test of containerboard
| |
T 803 cm-10
|
Fines fraction by weight of paper stock by wet screening
| |
T 261 cm-10
|
Gross heating value of black liquor
| |
T 684 om-15
|
Testing of fiber glass mats:
use of modified TAPPI procedures for sampling and lot acceptance,
stiffness, tear resistance, air permeability, and thickness
| |
T 1006 sp-15
|
Basis weight of fiber glass mats
| |
T 1011 om-15
|
Loss on ignition of fiber glass mats
| |
T 1013 om-15
|
Moisture sensitivity of fiber glass mats
| |
T 1014 om-15
|
Average fiber diameter of fiber glass mats
| |
T 1016 om-15
|
Acid insoluble lignin in wood and pulp
| |
T 222 om-15
|
Hydrogen ion concentration (pH) of paper extracts (cold
extraction method)
| |
T 509 om-15
|
Alkalinity of paper as calcium carbonate (alkaline reserve of
paper)
| |
T 553 om-15
|
Analysis of formaldehyde in aqueous solutions and of free
formaldehyde in resins
| |
T 600 om-15
|
Preparation of indicators and standard solutions
| |
T 610 sp-15
|
Score quality test
| |
T 829 om-15
|
Determining construction (nominal basis weight) of corrugated
board
| |
T 844 pm-15
|
Brightness of clay and other mineral pigments (d/0 diffuse)
| |
T 534 om-15
|
Specular gloss of paper and paperboard at 75 degrees
| |
T 480 om-15
|
Determination of effective residual ink concentration (ERIC) by
infrared reflectance measurement
| |
T 567 om-15
|
Bursting strength of paper
| |
T 403 om-15
|
Thickness (caliper) of paper, paperboard, and combined board
| |
T 411 om-15
|
Tensile breaking strength of water-saturated paper and
paperboard (“wet tensile strength”)
| |
T 456 om-15
|
Internal bond strength of paperboard (z-direction tensile)
| |
T 541 om-15
|
Bending resistance (stiffness) of paper (Taber-type tester in 0
to 10 Taber stiffness unit configuration)
| |
T 566 om-15
|
Bending resistance (stiffness) of paper and paperboard
(Taber-type tester in basic configuration)
| |
T 489 om-15
|
| |
|